Frigidaire Refrigerator ice maker not working: Causes + Fixes (2024)

Most Common Solution

Frigidaire Refrigerator Water Inlet Valve

Repair Instructions:

The water inlet valve controls water flow to the ice maker. It is an electric valve that opens when power is applied. If the valve is faulty or water pressure is too low, water can't flow through the valve so the ice maker won't get water to make ice. The valve needs at least 20 psi water pressure to work right. Check the valve has enough water pressure. If water pressure is good, use a voltmeter to check the valve gets power. If the valve has pressure and power but the ice maker won't fill, replace the faulty water inlet valve.

How to Replace Frigidaire Refrigerator Water Inlet Valve

1. Turn Off the Water Supply:

   • Locate the main water supply line and shut off the water to the Frigidaire refrigerator to prevent any leaks during the replacement process.

2. Unplug the Frigidaire Refrigerator:

   • Safely unplug the Frigidaire refrigerator from the power source to ensure your safety during the replacement.

3. Locate the Water Inlet Valve:

   • Refer to the user manual or search online for the precise location of the water inlet valve in your specific Frigidaire refrigerator model.
   • Typically, it is located at the back of the Frigidaire refrigerator, near the bottom.

4. Remove the Access Panel:

   • Use a screwdriver to remove the access panel covering the water inlet valve, providing clear access for replacement.
   • Keep track of the screws and store them in a secure place to prevent misplacement.

5. Disconnect Water Lines:

   • Identify the water lines connected to the inlet valve and take note of their positions for reconnection.
   • Gently detach the water lines by either sliding off the connectors or using pliers, depending on the connection type.

6. Remove the Old Water Inlet Valve:

   • Loosen the mounting screws or bolts holding the water inlet valve in place.
   • Carefully detach the old valve from the Frigidaire refrigerator, ensuring no damage occurs to the surrounding components.

7. Install the New Water Inlet Valve:

   • Position the new water inlet valve in place and secure it by tightening the mounting screws or bolts.
   • Reconnect the water lines to the corresponding terminals by firmly pressing them into place.

8. Replace the Access Panel:

   • Reattach the access panel by aligning it with the designated slots and securely tightening the screws.
   • Ensure that the panel is properly secured and adequately sealed.

9. Turn On the Water Supply and Test:

   • Turn the water supply back on and check for any leaks around the newly installed water inlet valve.
   • Plug the Frigidaire refrigerator back into the power source and test the water dispenser to confirm that the new valve is functioning correctly.

Always consult the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you are uncertain about the replacement process.

View Frigidaire Refrigerator Water Inlet Valve parts

Most Common Solution

Frigidaire Refrigerator Main Control Board

Repair Instructions:

The main control board in the Frigidaire refrigerator controls the electrical power going to the ice maker. If there is a problem with the control board, it could stop the ice maker from working. You can check the board to see if it is damaged or has a short circuit. You can also use a voltmeter to check if electricity is getting to the ice maker after looking at a wiring diagram for the Frigidaire refrigerator. This will help figure out if the issue is with the control board or somewhere else in the ice maker wiring.

How to Replace Frigidaire Refrigerator Main Control Board

1. Safety Measures:

   • Start by unplugging the Frigidaire refrigerator to avoid any electrical mishaps during the replacement process.
   • Remove all items from the Frigidaire refrigerator and clear any obstacles that may impede access to the control board.

2. Locate the Control Board:

   • Refer to the user manual or search online for the precise location of the main control board in your specific Frigidaire refrigerator model.
   • Typically, the control board is positioned behind the control panel or at the back of the Frigidaire refrigerator.

3. Remove the Control Panel:

   • Using an appropriate screwdriver, carefully detach the control panel from the Frigidaire refrigerator's exterior.
   • Ensure to keep track of the screws and store them in a secure place to prevent misplacement.

4. Disconnect Wires and Remove the Old Control Board:

   • Identify the wires connected to the control board and note their positions.
   • Gently disconnect the wires by sliding off the connectors or using pliers, depending on the type of connection.
   • Remove the old main control board from its housing by carefully pulling it out.

5. Install the New Control Board:

   • Place the new control board into the designated slot, ensuring a snug and secure fit.
   • Reconnect the wires to the corresponding terminals by firmly pressing them into place.

6. Replace the Control Panel:

   • Reattach the control panel by aligning it with the appropriate slots and securely tightening the screws.
   • Confirm that the panel is properly secured and tightly in place.

7. Restore Power and Test:

   • Plug the Frigidaire refrigerator back into the power source.
   • Set the Frigidaire refrigerator to the recommended settings and monitor its performance over the next few hours.
   • Ensure that the control board is effectively managing the Frigidaire refrigerator's functions and that it is operating as expected.

8. Clean Up:

   • Dispose of any packaging from the new control board and return the Frigidaire refrigerator's contents to their original positions.
   • Wipe down the area to eliminate any dust or debris that may have accumulated during the replacement process.

9. Final Check:

   • Double-check all connections and ensure that the control panel is securely fastened.
   • Confirm that the Frigidaire refrigerator is functioning smoothly and that the new main control board has resolved any previous issues.

Always refer to the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you are uncertain about the replacement process.

View Frigidaire Refrigerator Main Control Board parts

Common Solution

Frigidaire Refrigerator Water Filter

Repair Instructions:

If the water filter becomes clogged, it can limit water flow to the dispenser and ice maker. This can prevent the ice maker from working right. The water filter should be changed approximately every six months to keep water flowing freely. Replacing it regularly also maintains good water quality for ice and drinking. Clogged filters let less water through which starves the ice maker. So be sure to swap out old water filters twice a year or so. This will avoid restricted flow from a dirty filter and keep your ice maker producing ice properly.

How to Replace Frigidaire Refrigerator Water Filter Head:

1. Safety Precautions:

   • Start by unplugging the Frigidaire refrigerator from the power source to ensure your safety during the replacement.

2. Locate the Water Filter Head:

   • Identify the location of the water filter head inside your Frigidaire refrigerator. It's typically found in the upper right corner of the fresh food compartment.

3. Gather Necessary Tools and Replacement Parts:

   • Ensure you have the required tools, such as pliers and a compatible replacement water filter head.

4. Release the Old Water Filter:

   • Open the Frigidaire refrigerator door and locate the existing water filter. Depending on your model, you may need to twist, push, or pull the filter to release it. Follow the manufacturer's instructions.

5. Disconnect Water Lines:

   See Also

   Frigidaire Ice Maker Stuck [How To Fix]Frigidaire Ice Maker Not Working? 7 Ways to Fix ItFrigidaire Ice Maker Stuck [How To Fix]Ice Maker Refusing To Crush Ice? Here's 6 Steps To Fix It
   • Carefully disconnect the water supply lines from the old water filter head. These are usually push-fit or twist-on connections. Be prepared for some water spillage.

6. Remove the Old Water Filter Head:

   • Using pliers or the appropriate tool, remove any screws or fasteners securing the old water filter head in place. Take care not to damage surrounding components.

7. Prepare the New Water Filter Head:

   • Unpack the replacement water filter head and inspect it for any defects. Ensure it's clean and free from any packaging materials.

8. Install the New Water Filter Head:

   • Carefully position the new water filter head in the same location as the old one, ensuring it fits securely and snugly.

9. Reconnect Water Lines:

   • Reattach the water supply lines to the new water filter head. Ensure they are securely connected.

10. Secure the Water Filter Head:

    • If there are screws or fasteners holding the water filter head in place, secure the new water filter head using the same hardware.

11. Plug In and Test:

    • Reconnect the Frigidaire refrigerator to the power source and run water through the dispenser to check for any leaks or issues with the new water filter head.

12. Final Check:

    • Inspect the new water filter head and the connections to ensure they are properly installed and functioning, providing clean and filtered water for your Frigidaire refrigerator and ice dispenser.

View Frigidaire Refrigerator Water Filter parts

Common Solution

Frigidaire Refrigerator Fill Hose

Repair Instructions:

Low water pressure or a faulty water inlet valve can cause the ice maker's fill tube to freeze up. This blocks water from entering the ice tray. Use a hair dryer to thaw out the frozen fill tube. But also check that water pressure to the Frigidaire refrigerator is high enough and test that the water inlet valve works properly. If it doesn't, fix these issues so the fill tube won't freeze again. If the fill tube is damaged, replace it with a new one.

How to Replace Frigidaire Refrigerator Fill Hose

1. Prepare the Frigidaire Refrigerator:

   • Begin by unplugging the Frigidaire refrigerator and locating the water shut-off valve to ensure a safe working environment during the replacement process.
   • Empty the contents of the Frigidaire refrigerator and clear the area around the fill hose.

2. Locate the Fill Hose:

   • Consult the user manual or search online to identify the exact location of the fill hose in your specific Frigidaire refrigerator model.
   • Typically, it is located at the back of the Frigidaire refrigerator, near the water source connection.

3. Turn off the Water Supply:

   • Shut off the water supply connected to the Frigidaire refrigerator to prevent any leaks or spills during the replacement process.

4. Detach the Old Fill Hose:

   • Use adjustable pliers or an appropriate tool to loosen the fittings connecting the old fill hose to the water supply and the Frigidaire refrigerator.
   • Drain any water remaining in the hose into a bucket or container.

5. Install the New Fill Hose:

   • Attach the new fill hose to the water supply and the Frigidaire refrigerator, ensuring that the fittings are secure and properly tightened.
   • Check for any signs of leakage or loose connections.

6. Turn on the Water Supply and Test:

   • Turn the water supply back on and monitor the connections for any signs of leaks.
   • Run a test cycle to ensure that the new fill hose is functioning correctly and delivering water to the Frigidaire refrigerator as intended.

7. Clean Up:

   • Dispose of any packaging from the new fill hose and return the Frigidaire refrigerator's contents to their original positions.
   • Wipe down the area to remove any dust or debris that may have accumulated during the replacement process.

8. Regular Maintenance:

   • Perform regular checks on the fill hose and connections to ensure they remain secure and free from any potential issues that may arise over time.

Always refer to the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you encounter difficulties during the replacement process.

View Frigidaire Refrigerator Fill Hose parts

Common Solution

Frigidaire Refrigerator Ice Maker Assembly

Repair Instructions:

A faulty part in the ice maker assembly can prevent ice production. Many ice maker parts cannot be bought separately, so the entire assembly may need replacement. But first check the water inlet valve, water line, and fan to see if one of those is the problem. Also confirm the freezer temperature is at least 10 degrees Fahrenheit. If none of those issues are found, and the freezer is cold enough, replace the whole ice maker assembly since a part inside it is likely defective.

How to Replace Frigidaire Refrigerator Ice Maker Assembly

1. Prepare the Frigidaire Refrigerator:

   • Unplug the Frigidaire refrigerator and locate the water shut-off valve to ensure a safe working environment during the replacement process.
   • Empty the contents of the freezer and remove any items obstructing access to the ice maker assembly.

2. Locate the Ice Maker Assembly:

   • Consult the user manual or search online to pinpoint the exact location of the ice maker assembly in your specific Frigidaire refrigerator model.
   • Typically, it is found within the freezer compartment, attached to the freezer wall or ceiling.

3. Turn off the Water Supply:

   • Shut off the water supply to the Frigidaire refrigerator to prevent any leaks or spills during the replacement process.

4. Remove the Old Ice Maker Assembly:

   • Use a screwdriver to detach any screws or fastenings securing the old ice maker assembly in place.
   • Disconnect any wiring harnesses and the water supply line, carefully noting their positions for the installation of the new assembly.

5. Install the New Ice Maker Assembly:

   • Connect the wiring harnesses and the water supply line to the corresponding terminals on the new ice maker assembly.
   • Secure the new assembly in place by fastening the appropriate screws or attachments.

6. Turn on the Water Supply and Test:

   • Turn the water supply back on and monitor the connections for any signs of leaks.
   • Run a test cycle to ensure that the new ice maker assembly is functioning correctly and producing ice.

7. Clean Up:

   • Dispose of any packaging from the new ice maker assembly and return the freezer's contents to their original positions.
   • Wipe down the area to remove any dust or debris that may have accumulated during the replacement process.

8. Regular Maintenance:

   • Maintain regular cleaning of the ice maker assembly and check for any issues that may affect its performance over time.

Always refer to the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you encounter difficulties during the replacement process.

View Frigidaire Refrigerator Ice Maker Assembly parts

Common Solution

Frigidaire Refrigerator Door Switch

Repair Instructions:

The door switch turns off the ice and water dispenser when the Frigidaire refrigerator door opens. This switch stops dispensing when the door is ajar. If the switch is faulty, the dispenser won't turn on at all. To test the door switch, use a multimeter to check for continuity. Have the switch activated as if the door is closed. If there is no continuity in this state, the switch is defective and should be replaced.

How to Replace Frigidaire Refrigerator Door Switch

1. Safety Precautions:

   • Before beginning any work, unplug the Frigidaire refrigerator to ensure your safety during the replacement process.
   • Clear the area around the door switch and remove any items that might obstruct access to the switch.
2. Locate the Door Switch:
   • Consult the user manual or search online to pinpoint the exact location of the door switch in your specific Frigidaire refrigerator model.
   • Typically, it is positioned near the top of the Frigidaire refrigerator compartment, close to the door hinge.
3. Remove the Old Door Switch:
   • Use a screwdriver to detach the screws securing the old switch in place or gently pry the switch from its position.
   • Disconnect any wires attached to the switch, taking note of their positions for the installation of the new switch.
4. Install the New Door Switch:
   • Connect the wires to the corresponding terminals on the new door switch, ensuring a secure and proper connection.
   • Position the new switch in place and fasten it securely with the appropriate screws or fastenings.
5. Test the New Switch:
   • Plug the Frigidaire refrigerator back into the power source.
   • Test the door switch by opening and closing the Frigidaire refrigerator door to ensure that the light turns on and off as expected.
6. Clean Up:
   • Discard any packaging from the new door switch and return the Frigidaire refrigerator's contents to their original positions.
   • Wipe down the area to remove any dust or debris that may have accumulated during the replacement process.
7. Final Check:
   • Double-check all connections to ensure that the door switch is securely fastened.
   • Verify that the Frigidaire refrigerator light is functioning correctly and that the new door switch has effectively resolved any previous issues.

View Frigidaire Refrigerator Door Switch parts

Rare Solution

Frigidaire Refrigerator Ice Level Control Board

Repair Instructions:

Some Frigidaire refrigerators have an ice level control board and sensor that monitors how full the ice bucket is. When the bucket is full, this board cuts power to the ice maker to stop more ice being made. If faulty, this control board may prevent the ice maker from turning on at all. To check it, open the door on models with an in-door ice dispenser. Press the dispensing paddle and door switch. If the indicator light does not stay on steadily, the ice level control board is probably defective and needs replacement. This will restore power to the ice maker so it can run when the bucket is not completely full of ice.

How to Replace Frigidaire Refrigerator Ice Level Control Board

1. Safety Precautions:

   • Unplug the Frigidaire refrigerator from the power source to ensure your safety during the replacement process.
   • Clear the area around the ice maker and remove any items that might obstruct access to the control board.

2. Locate the Ice Level Control Board:

   • Consult the user manual or search online to identify the specific location of the ice level control board in your Frigidaire refrigerator model.
   • Typically, it is found near the ice maker, behind the front panel, or within the control housing.

3. Remove the Old Control Board:

   • Use a screwdriver to detach any screws or fastenings securing the old control board in place.
   • Disconnect any wiring harnesses attached to the board, taking note of their positions for the installation of the new control board.

4. Install the New Control Board:

   • Connect the wiring harnesses to the corresponding terminals on the new control board, ensuring a secure and proper connection.
   • Secure the new control board in place by fastening the appropriate screws or attachments.

5. Test the Ice Maker:

   • Plug the Frigidaire refrigerator back into the power source.
   • Run a test cycle to ensure that the new control board is functioning correctly and regulating the ice maker's operations as intended.

6. Clean Up:

   • Dispose of any packaging from the new control board and return the Frigidaire refrigerator's contents to their original positions.
   • Wipe down the area to remove any dust or debris that may have accumulated during the replacement process.

7. Final Check:

   • Double-check all connections to ensure that the control board is securely fastened.
   • Confirm that the new control board has effectively resolved any previous issues with the ice maker's functionality.

Always refer to the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you encounter difficulties during the replacement process.

View Frigidaire Refrigerator Ice Level Control Board parts

Rare Solution

Frigidaire Refrigerator Control Board

Repair Instructions:

The main control board in the Frigidaire refrigerator regulates power to the ice maker. If this board malfunctions, it could prevent the ice maker from working. Visually inspect the control board for any apparent damage or burnt out components. Additionally, use a multimeter to check if electricity is getting to the ice maker. You'll need to consult the Frigidaire refrigerator's wiring diagram to know where to test for voltage. This will confirm if the issue is with the control board not sending power or something else in the ice maker wiring.

How to Replace a Frigidaire Refrigerator Control Board

1. Unplug the Frigidaire Refrigerator. Unplug the Frigidaire refrigerator from the electrical outlet to ensure your safety while working on the appliance.
2. Locate the Control Board. Identify the current control board, typically located in the Frigidaire refrigerator's control panel, which is often located on the front of the appliance, near the top or inside the Frigidaire refrigerator section.
3. Document Wiring Connections. Take photographs or make a detailed note of the wiring connections on the old control board for correctly reconnecting the wires to the new control board.
4. Disconnect Wiring. Gently disconnect the wires and connectors from the old control board.
5. Remove the Old Control Board. You may need to remove screws, clips, or retaining brackets securing the old control board. Carefully remove these components to access the control board.
6. Install the New Control Board. Position the new control board in the same location as the old one and secure it with screws, clips, or brackets.
7. Reconnect Wiring. Reattach the wires and connectors to the corresponding terminals on the new control board.
8. Plug in the Frigidaire Refrigerator. Allow the Frigidaire refrigerator to run for a while. Test the control board's functionality by adjusting temperature settings, ensuring that it properly regulates the Frigidaire refrigerator's temperature and features like defrost cycles.

View Frigidaire Refrigerator Control Board parts

Rare Solution

Frigidaire Refrigerator Icemaker Fill Tube Heater

Repair Instructions:

The fill tube delivers water to the ice maker. It has a small heater to keep it from freezing up. This heater prevents ice from blocking the tube so water can continue flowing through. If ice builds up in the fill tube, the icemaker will not get water to make new ice cubes. The heater keeps the fill tube just warm enough to avoid ice clogging it up. A working fill tube heater is important for the ice maker to function properly.

How to Replace Frigidaire Refrigerator Icemaker Fill Tube Heater

1. Safety Precautions:

   • Unplug the Frigidaire refrigerator from the power source to ensure your safety during the replacement process.
   • Empty the contents of the freezer and clear the area around the icemaker.

2. Locate the Icemaker Fill Tube Heater:

   • Consult the user manual or search online to identify the location of the icemaker fill tube heater in your Frigidaire refrigerator model.
   • Typically, it is located near the fill tube of the icemaker.

3. Remove the Old Fill Tube Heater:

   • Use a screwdriver to detach any screws or fastenings securing the old fill tube heater in place.
   • Carefully disconnect any wiring harnesses connected to the heater, noting their positions for the installation of the new heater.

4. Install the New Fill Tube Heater:

   • Connect the wiring harnesses to the corresponding terminals on the new fill tube heater, ensuring a secure and proper connection.
   • Secure the new fill tube heater in place using the appropriate screws or fastenings.

5. Test the Icemaker:

   • Plug the Frigidaire refrigerator back into the power source.
   • Monitor the icemaker to ensure that the new fill tube heater is functioning correctly and preventing the fill tube from freezing.

6. Clean Up:

   • Dispose of any packaging from the new fill tube heater and return the freezer's contents to their original positions.
   • Wipe down the area to remove any dust or debris that may have accumulated during the replacement process.

7. Regular Maintenance:

   • Perform routine checks on the icemaker and fill tube heater to prevent any future occurrences of freezing or malfunction.

Always consult the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you encounter difficulties during the replacement process.

View Frigidaire Refrigerator Icemaker Fill Tube Heater parts

Low Water Pressure from House Supply

Repair Instructions:

The house might not have high enough water pressure for the Frigidaire refrigerator. The water inlet valve provides water to the ice and water dispenser. It needs at least 20 psi of water pressure to work correctly. Test the water flow and measure the pressure to the valve. Confirm it is at minimum 20 psi. If the pressure is too low, the valve will not open fully. This prevents enough water from flowing through it to the ice and water dispenser.

View Frigidaire Low Water Pressure from House Supply parts

Confirm icemaker is On

Repair Instructions:

Check that the ice maker is turned on and the arm or paddle can move freely. For Frigidaire refrigerators with ice dispensing built into the door, open the door and press the ice dispenser flap and door switch. Make sure the indicator light stays on steadily, not flashing or turning off. If the light acts up, there is likely an issue with the door switch or ice dispenser components. The light should remain solid on if the ice maker is on and working properly. This is a simple initial test to tell if the ice maker has power and can go through its ice making cycle when activated.

How to Replace Frozen Fill Tube on Ice Maker

1. Prepare the Freezer:

   • Unplug the Frigidaire refrigerator and locate the water shut-off valve to ensure a safe working environment during the replacement process.
   • Empty the contents of the freezer and remove any items obstructing access to the ice maker.

2. Locate the Frozen Fill Tube:

   • Identify the frozen fill tube in the freezer, typically located near the back wall behind the ice maker.
   • Verify the extent of the blockage and assess whether the fill tube needs to be replaced.

3. Thaw the Fill Tube:

   • Use a hairdryer set to a low heat setting or carefully apply a warm towel to the frozen fill tube to thaw the blockage.
   • Be cautious not to use excessive heat or force to avoid damaging the fill tube.

4. Inspect for Damage:

   • Examine the fill tube for any cracks, leaks, or other signs of damage that may require a replacement.

5. Replace the Fill Tube (if necessary):

   • If the fill tube is damaged or unable to be adequately thawed, consider replacing it with a new one.
   • Follow the manufacturer's instructions to install the new fill tube securely in place.

6. Test the Ice Maker:

   • Plug the Frigidaire refrigerator back in and monitor the ice maker to ensure that water flows smoothly into the ice mold without any further blockages.

7. Regular Maintenance:

   • Maintain regular checks on the fill tube and the freezer's temperature to prevent future occurrences of the fill tube freezing.

Always consult the specific user manual for your Frigidaire refrigerator model and consider seeking professional assistance if you encounter difficulties during the replacement process.

View Frigidaire Confirm icemaker is On parts

Frozen fill tube on ice maker

Repair Instructions:

The ice maker fill tube can freeze up if water pressure is too low or the water inlet valve is faulty. This blocks water from getting to the ice tray. Using a hair dryer to thaw the frozen tube may help temporarily. But the real issues of low pressure or a defective valve need to be addressed. Check that water pressure to the Frigidaire refrigerator meets the recommended PSI. Test the water inlet valve to confirm it is opening properly. Fixing the source of the problem will prevent the fill tube from freezing again. Thawing it is just a short-term fix if water can't flow correctly through the valve to the ice maker.

View Frigidaire Frozen fill tube on ice maker parts

Freezer Temperature is Above 10 Degrees F (-12C)

Repair Instructions:

The ice maker will not make ice cubes well if the freezer temperature is warmer than 10 degrees Fahrenheit (-12C). For the ice maker to work properly, the freezer should be set between 0 and 5 degrees Fahrenheit (-18 to -15C). If the freezer is too warm, make sure the condenser coils are clean and the condenser fan is working. Also check if frost has built up on the evaporator coils. If there is frost on the evaporator coils, part of the defrost system has likely stopped working properly. This can cause the freezer temperature to be too high for the ice maker.

View Frigidaire Freezer Temperature is Above 10 Degrees F (-12C) parts